STAGE 3 SYSTEM WITH STRUTS - SPRINTER 2WD (2007+ 2500) by VAN COMPASS
STAGE 3 SYSTEM WITH STRUTS - SPRINTER 2WD (2007+ 2500) by VAN COMPASS
SKU:7191-M-RS
Couldn't load pickup availability
Stage 3 System Benefits:
- VC Inverted Monotube Rally Struts
- VC tuned Falcon 2.1 Monotube Shocks
- Enhanced cornering stability and reduced wind sway
- More effective control over large and small bumps
- Improved handling feel on rough roads and broken pavement
- Increased bottom out resistance
- Increased rear spring rate for heavily loaded vans
Intended Use:
- RV and conversion vans that suffer from bottom out
- Heavy passenger vans that want a basic ride quality upgrade
The Stage 3 system is targeted at rear heavy vans like RV's and coaches. Now including our Inverted Rally strut, it builds on the Stage 1 kit by adding a rear Sumo spring upgrade for increased control.
Falcon 2.1 dampers at all 4 corners, expertly tuned for van users, dramatically improve handling. The innovative, inverted design of our Rally Strut is much more durable for heavily loaded vans, and dramatically increases handling control in the front end. With superior construction and a larger, more effective damper piston, these shocks will completely change the driving dynamics of your van. A more effective damper reduces leaning in corners, violent swaying, and smooths out jarring impacts. This in turn increases comfort and safety factor, while reducing driver fatigue.
Our progressive foam Bump Buddy replacement jounce bumpers replace your hard factory rubber bump stops, adding improved spring curve progression, reducing sway, and increasing bottom out resistance without any unnecessary clunking or harshness. In the rear, we utilize Sumo Springs to prevent sag and limit harsh bottom out when loaded.




Collapsible content
INCLUDED COMPONENTS
- Monotube Inverted Rally Struts
- Front Bump Buddies Jounce Bumpers (pair)
- Falcon 2.1 monotube shocks **choose your tune based on loaded van weight**
- Rear Sumo springs (pair)
FITMENT GUIDE
MODEL: SPRINTER 2500
YEAR: 2007-PRESENT
DRIVE TYPE: 2WD
>>COMPLETE WHEEL AND TIRE FITMENT GUIDE<<
>>DON'T KNOW YOUR VANS WEIGHT? USE THE CAT SCALE LOCATOR<<
NOTE: NOT compatible with Sumo Spring Rebel series of springs, specifically Sumo Spring part numbers: SSR-327-47-2 and SSR-327-40-2 There is a Sumo Spring bracket associated with those kits which makes contact with the shock body.
LABOR TIMES
Recommended Shop Labor Time: 5 Hours