Skip to product information
1 of 5

STAGE 3 SYSTEM - SPRINTER 2WD (2007+ 2500) by VAN COMPASS, NO STRUTS

STAGE 3 SYSTEM - SPRINTER 2WD (2007+ 2500) by VAN COMPASS, NO STRUTS

SKU:7191-L-NS

Regular price $ 944.47 USD
Regular price Sale price $ 944.47 USD
Sale Sold out
SHOCK TUNE

Our Stage 3 kit is the preferred kit for heavy vans needing additional support front and rear. Our tuned Falcon shocks smooth out the harshness experienced on washboard roads and shrug off abrupt impacts. Using our knowledge of suspension tuning, we're able to minimize side to side sway and balance out jarring impacts so that your van or motorhome maintains much better control and handles more predictably. The Sumo Spring front replacement bump stop adds improved spring progression and bottom out resistance, futher controlling swaying and jarring impacts. A rear Sumo Spring adds further support and helps prevent sagging and wallowy travel from excess payload. This is a great kit for heavily built out adventure vans, work vans and Class C motorhomes. Great for older vans that need new shocks to replace high mileage units. We spec each set of Falcon shocks to your van's weight, please be sure to weigh your van to order the correct shock damping. Vans that are near the gross vehicle weight rating (GVWR) may want to add additional rear suspension parts to reduce rear suspension sag and improve stability.

Stage 3 System Benefits:

  • Reduce the back and forth sway over obstacles
  • Enhances cornering stability
  • Improved bottom out control
  • Increased spring rate in the rear fights sagging from heavy loads
  • Control large and small bumps more efficiently than factory shocks and bump stops
  • Reduces cross wind sway
  • The system is 100% bolt on

View full details

Collapsible content

INCLUDED COMPONENTS

  • Front Falcon Bump Buddies Jounce Bumpers (pair)
  • Falcon 2.1 monotube shocks **choose your tune based on loaded van weight**
  • Rear Sumo Springs (pair)

FITMENT GUIDE

MODEL: SPRINTER 2500

YEAR: 2007-PRESENT

DRIVE TYPE: 2WD

>>COMPLETE WHEEL AND TIRE FITMENT GUIDE<<

>>DON'T KNOW YOUR VANS WEIGHT? USE THE CAT SCALE LOCATOR<<

NOTE: NOT compatible with Sumo Spring Rebel series of springs, specifically Sumo Spring part numbers: SSR-327-47-2 and SSR-327-40-2 There is a Sumo Spring bracket associated with those kits which makes contact with the shock body.

INSTRUCTIONS

Sprinter 2wd Front Falcon Bump Buddies installation instructions:

Falcon 2.1 rear shock installation instructions:

LABOR TIMES

Recommended Shop Labor Time: 3.5 Hours

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Chad Allen
Well worth the investment

Easy install in the driveway with a jack, jack stands, torque wrench, and a couple of wrenches. Reduced body roll significantly and smoothed out everything else both on and off road.